12V Single Button Bistable Relay Module
A 12V Single Button Bistable Relay Module is a type of electrical switch. It is made up of an input terminal for a single or more control signal and an operating contact terminal. To allow the 12V Single Button Bistable Relay Module to pull or close, press the button on the board or the external button. To activate the low level, first press the pull button and then the button. When the electricity is restored, the relay is turned off.
The maximum current of the relay’s secondary output is 10A, which implies that the maximum operating current of the controlled circuit or equipment cannot exceed 10A, and it can be connected to the normally open or normally closed end depending on its own requirements. The exterior suction indication light’s welding position is reserved, and the welding indicator light is likewise welded to the board.
Key Product Features:
- The power supply is negatively linked and will be burned off, and there is no power supply reverse safeguard.
- Low-level control: the signal line and ground contact are both trigger signals.
- Using a double-panel PCB design.
- Ballast is used to provide tension and stability.
- With reverse cut defense In reverse polarity, a diet is short in duration without causing product harm.
- Real Songle relay control loads are used.
- The trigger can also be an external trigger switch; the device has a decent seat and leads wires, making it easier to use.
Specifications:
- Supply Voltage: 5V 12V
- Size: 52.8 x 32 x 18mm
Package Contains:
- 1pc x 12V Single Button Bistable Relay Module