Digital Display Delay Timer Control Switch Module
The Digital Display Delay Timer Control Switch Module is a 5V LED display digital delay timer relay control switch module, which can be used to control electricity. It has a strong timing function, a counting function, and a voltage detection function. It has an easy-to-understand interface and meets all your needs. Set the parameters after power failure: eternal memory with optocoupler separation, better anti-jamming capability, and an industrial-grade circuit board.
With the emergency stop function (“STOP” key) and reverse polarity protection, this Digital Display Delay Timer Control Switch Module can help you solve many problems encountered when using a relay controller. It has the sleep mode (optional); This mode can reduce power consumption when there is no operation within 5 minutes. You can set different OP, CL, and LOP parameters (independent of each other), which are automatically saved when you turn them on or off the monitor.
Key Product Features:
- Digital Display Delay Timer Control Switch Module is multi-functional; strong timing, counting, and voltage detecting functions; high-level trigger, low-level trigger, and switch control support.
- The power supply has a wide voltage range (6 – 30V), for easy use.
- The interface is straightforward and simple, powerful and simple to use, and it covers practically all of your demands.
- The emergency stop button (“STOP” button);
- Reverse polarity protection ensures that the product will not be burned.
- Increase the sleep mode, if this mode is activated, and if no operation is performed within 5 minutes, the monitor will automatically turn off any key wake-up.
- You can configure alternative OP, CL, and LOP settings that are independent of one another and are automatically preserved.
- All parameter settings are not lost when the module is turned off.
Specifications:
- Working voltage: 6 – 30V power supply
- Trigger source: high level trigger (3.0V ~ 24V), low level trigger (0.0V ~ 0.2V), switch control (passive switch).
- Output capacity: can control the DC 30v 5A or within the AC 220v5A within the equipment
- Quiescent current: 20mA Operating current: 50mA
- Life: more than 100,000 times.
- Operating temperature: -40-85 °
- Size: 6.2 x 3.8 x 1.7cm
Operating Mode:
Voltage Detection:
- nL1 is the lower limit voltage, and UL1 is the upper limit voltage.
- U-1: Charging detection: When the measured voltage is less than the lower limit voltage, the relay is activated; when the measured voltage exceeds the upper limit voltage, the relay is deactivated.
- U-2: Discharge detection: When the measured voltage is less than the lower limit voltage, the relay is switched off; when the measured voltage is more than the upper limit voltage, the relay pulls.
- U-3: Interval conduction: When the measured voltage falls between the upper and lower limits of the relay, the other case is turned off.
- U-4: Out-of-range conduction: the measured voltage is less than or more than the lower limit voltage, indicating relay conduction.
How To Choose The Time Range?
- After you’ve chosen the mode selection screen parameter value, press the “STOP” button briefly to select the time range. The decimal point is in the unit position, and the time range is from 1 second to 9999 seconds. Timing range: 0.1 seconds to 999.9 seconds, XXX. X decimal point in decade place. Timing range: 0.01 seconds to 99.99 seconds, XX. XX decimal point in a hundred places.
- Timing range: 1 minute to 9999 minutes, X. X. X. X. decimal full brightness For example, if you wish to adjust “OP” to 3.2 seconds, shift the decimal point to the decade place, and then display003.2 on the digital display.
How To Set Parameters:
Package Contains:
1pc x Digital Display Delay Timer Control Switch Module